How to Clean a Bathtub

How to Clean a Bathtub

Bathtubs are exposed to soap, shampoo, body oils, dirt and water every time they're used. Over time, these materials can leave behind soap scum, grime and residue that make the tub look dull or dirty.

Regular cleaning can help prevent heavy buildup and keep your bathtub easier to maintain.

Why Do Bathtubs Get Dirty?

Most bathtub buildup comes from a combination of:

• Soap and body wash

• Shampoo and conditioner

• Body oils

• Dirt and grime

• Minerals in water

• Hair and other debris

• Everyday bathroom residue

Buildup is especially common around the drain, along the waterline, in corners and around faucets and fixtures.

What You'll Need

For routine bathtub cleaning, gather:

• Natural Armor Tub & Tile Cleaner

• Soft sponge or microfiber cloth

• Soft-bristle cleaning brush

• Clean water

• Clean towel or microfiber cloth

Always follow the product label and the manufacturer's care instructions for your bathtub surface.

Step 1: Remove Everything From the Tub

Remove shampoo bottles, soap, bath toys, mats and other items.

This gives you access to the entire bathtub, including areas underneath bottles and containers where moisture and residue often collect.

Step 2: Rinse the Bathtub

Rinse away loose hair, dirt and debris.

This allows your cleaner to work directly on soap scum, grime and other buildup rather than loose surface debris.

Step 3: Apply Natural Armor Tub & Tile Cleaner

Apply Natural Armor Tub & Tile Cleaner according to the product label directions.

Pay extra attention to areas with visible soap scum, grime or residue.

Step 4: Allow the Cleaner to Work

Give the cleaner the appropriate contact time specified on the product label.

Allowing the product time to work can help loosen buildup and make wiping or scrubbing easier.

Step 5: Wipe or Gently Scrub

Use a soft sponge, microfiber cloth or appropriate soft-bristle brush to clean the bathtub.

Focus on:

• Tub walls

• The bottom of the bathtub

• Corners and edges

• Around the drain

• Around faucets and fixtures

• Soap dishes and ledges

• Textured areas

• Areas with visible buildup

Avoid overly abrasive pads or brushes that could scratch or dull the bathtub finish.

Step 6: Rinse Thoroughly

Rinse the bathtub thoroughly as directed to remove loosened dirt, soap scum, grime and cleaner.

Inspect the tub after rinsing. Stubborn areas may require another application.

Step 7: Dry the Bathtub

Use a clean towel or microfiber cloth to wipe away remaining water.

Drying the bathtub can help reduce water spots and residue left behind as water evaporates.

How Do You Clean a Very Dirty Bathtub?

If soap scum and grime have accumulated over a long period, one cleaning may not remove everything.

Apply Natural Armor Tub & Tile Cleaner according to the label directions, allow the recommended contact time and gently work the affected areas with an appropriate non-abrasive sponge or brush.

For stubborn buildup, repeat the process rather than using aggressive abrasives that could damage the tub's finish.

How Often Should You Clean Your Bathtub?

Cleaning frequency depends on how often the bathtub is used.

A tub used every day generally benefits from regular light cleaning. This helps prevent soap residue and grime from developing into thicker layers that require more effort to remove.

How to Keep a Bathtub Cleaner

Simple habits can make routine bathtub cleaning easier:

• Rinse the tub after use

• Remove hair and debris from the drain area

• Don't allow standing water to remain

• Keep the bathroom properly ventilated

• Clean underneath bottles and bath products

• Address visible soap scum promptly

• Perform routine cleaning regularly

Clean Your Bathtub With Natural Armor

Natural Armor Tub & Tile Cleaner is a convenient, ready-to-use solution designed to help tackle soap scum, dirt, grime and everyday bathroom buildup on compatible surfaces.

Use it as part of your regular bathroom cleaning routine to help keep your bathtub clean and prevent layers of residue from accumulating.

Always follow the product label directions and test an inconspicuous area first if you're unsure about surface compatibility.