How to Use Natural Armor Mold & Mildew Cleaner

How to Use Natural Armor Mold & Mildew Cleaner

Natural Armor All-Natural Mold & Mildew Cleaner is a ready-to-use, bleach-free cleaner designed to help remove mold and mildew stains from a variety of compatible surfaces indoors and outdoors.

Because the formula is ready to use, there's no need to mix or dilute it before normal application. Always follow the directions on the product label.

Step 1: Identify the Area You Want to Clean

Natural Armor Mold & Mildew Cleaner can be used on compatible surfaces in moisture-prone areas such as:

• Bathrooms

• Showers

• Bathtubs

• Kitchens

• Basements

• Tile and grout

• Concrete

• Glass

• Fiberglass

• Stainless steel

• Other compatible indoor and outdoor surfaces

Before cleaning, determine whether excess moisture, a leak or another condition may be contributing to the mold or mildew problem.

Step 2: Remove Loose Dirt and Debris

Remove loose dirt, hair, soap residue or other surface debris when necessary.

This helps the cleaner make better contact with the mold and mildew staining underneath.

Step 3: Apply Natural Armor Mold & Mildew Cleaner

Apply Natural Armor All-Natural Mold & Mildew Cleaner directly to the affected surface according to the product directions.

The formula is ready to use, so no dilution or mixing is required for normal application.

Make sure the stained area receives adequate coverage.

Step 4: Allow the Cleaner to Work

Allow the cleaner the recommended contact time before wiping or scrubbing the surface.

Giving the formula time to remain in contact with the affected area helps it work on the mold and mildew staining.

Always follow the contact-time instructions on the product label.

Step 5: Wipe or Scrub the Surface

After the recommended contact time, clean the surface according to the product directions.

Depending on the material and severity of the staining, you may need to:

• Wipe the surface with a cloth or sponge

• Gently scrub textured surfaces

• Use an appropriate brush on grout or concrete

• Repeat treatment for stubborn staining when directed

Avoid aggressive scrubbing that could damage delicate surfaces or deteriorated grout.

Step 6: Allow the Area to Dry

Once cleaning is complete, allow the surface to dry thoroughly.

This is an important step because mold and mildew problems are strongly associated with excess moisture.

Improve ventilation and airflow whenever possible.

Do You Need to Dilute Natural Armor Mold & Mildew Cleaner?

No. Natural Armor Mold & Mildew Cleaner is ready to use.

For normal use, apply the product according to the label rather than mixing it with water or other cleaning products.

Can You Use It Indoors and Outdoors?

Natural Armor Mold & Mildew Cleaner can be used for appropriate indoor and outdoor applications on compatible surfaces.

Indoor uses may include bathrooms, showers, kitchens and basements.

Outdoor applications may include compatible concrete, stone and other surfaces where mold and mildew staining has developed.

Never Mix Cleaning Products

Do not mix Natural Armor Mold & Mildew Cleaner with bleach or other household cleaning products unless the product directions specifically state that they can be safely combined.

Mixing different cleaners can potentially create unwanted or hazardous chemical reactions.

How Can You Keep Mold and Mildew From Returning?

After cleaning, try to correct the moisture conditions that allowed the problem to develop.

• Improve bathroom ventilation

• Run exhaust fans during and after showers

• Repair plumbing leaks

• Reduce indoor humidity

• Remove standing water

• Improve outdoor drainage

• Allow wet surfaces to dry thoroughly

• Clean moisture-prone areas regularly

Cleaning removes the existing staining. Controlling moisture helps reduce the conditions that allow mold and mildew to return.